Ghost II Immobiliser
Secure your vehicle from hacking, key-cloning and car theft. It's completely silent and inaccessible to a potential thief since it doesn't employ LED indicators or key fob tags to signal that it's there.
Transport Mode can be temporarily disabled for situations like transport of vehicles or when your car is being repaired.
Simple Change of PIN Code
Ghost is a revolutionary next-generation security device that will protect your vehicle without cutting wires, or adding aftermarket alarm or immobiliser key fobs. It connects directly to the vehicles CAN Data Network and a personalised PIN Code can be programmed into it by using the buttons that are factory-installed on the steering wheel and dash. This code blocks engine start and is indetectable to any RF scanning or code grabbing technologies that are used by modern thieves.
The system also has an emergency Pin Code override in case the user forgets their code or a button for programming becomes inoperative. It also features a Service/Valet Mode which allows the vehicle to be started temporarily and driven without requiring the use of a valid code. This makes it ideal for transportation or maintenance.
The UK automotive aftermarket, while thriving, is not invincible to theft. The OBD port on your vehicle could be hacked by thieves in order to bypass most traditional deterrents like locking your steering wheel and wheels. This can be accomplished with the use of a laptop, USB cable, and an inexpensive OBD scanner available online for under PS50.
It is essential to secure your vehicle with an immobiliser Ghost II to stop theft. It's a subtle device that will help stop theft of your vehicle and is simple to use once you've received your PIN code. The device is enclosed inside a small box that can be plugged inside the wiring harness of your vehicle. It can be mounted anywhere on your car and is weatherproof. This makes it hard for thieves to locate. It is also simple to install and comes backed by a guarantee.
Small, weatherproof device
The device is connected to the CAN data network within your vehicle without cutting cables and operates quietly. The device can be programmed with a an unique PIN through the buttons on your dashboard or steering wheel. This will help prevent theft. The device has an GPS tracker built in. Many car insurance companies recommend it. It can be activated using an app that you can install on your smartphone. It is weatherproof and can be concealed in the car and is nearly impossible for thieves to track it down.
In contrast to traditional systems that can be detected by criminals, the ghost II is silent and requires between 4 and 21 button presses on the vehicle's buttons. The owner of the vehicle can modify the sequence according to their preferences and it cannot be cracked. There is immobiliser ghost that can be used to disable the system. If you are selling your vehicle, there's also a master reset code which can reset the immobiliser CAN bus.
Modern thieves employ diagnostics to detect circuit breaks in modern cars. The Ghost however, doesn't have any. Our team of CANbus fitters can install this system into a vehicle with confidence.
The Ghost is compatible with all vehicle, in contrast to other CANbus immobilisers that require a key fob. The technology is so advanced that it is able to protect against various security threats including signal relay attacks as well as ECU switching. It is compatible with a wide range of smartphones and will send alerts to owners if their vehicle is driven in a way that is not authorized.
Tested for each vehicle
Ghost is the only immobiliser on the market that can protect your vehicle against key hacking, key cloning and even theft of keys. The thief must physically remove the device from your vehicle, take it away in the form of a trailer, then put it back on another vehicle to steal the Ghost secured vehicle. It also protects against the use of lock on wheels, jumper cable and universal keys.
This system is incredibly simple to set up and operates in complete silence. It connects to the CAN data circuit in your vehicle allowing it to communicate directly with your ECU (Engine Control Unit). It is completely sealed and small that it can be wrapped inside your vehicle harness and put in any place, making it nearly impossible for thieves to spot.
Once it is installed, it stops the vehicle from starting unless the specific sequence of disarming is entered by pressing the buttons on your vehicles steering wheel, door panels or centre console. You can set it up to 20 digits and decide on how secure you'd like to be. You can also use it to activate a service/valet option that lets you temporarily start your vehicle and drive it without having to enter your PIN.
It is a CAN data circuit, which means there are no radio frequencies, like an immobiliser that is traditional. It means that thieves can't listen to the relay and try to figure out the PIN code being entered. It does not have circuit breaks and cannot be detected by scanners, diagnostic tools or code-grabbing technology.
At Boundary Car Care we have been proud to be approved installers of this fantastic product for quite some time now and are hugely amazed by how well it works and the peace of mind it offers our customers. It is an excellent solution for protecting your pride and joy during these difficult times.
Emergency Pin Code override
The Ghost immobiliser is a weatherproof and tamper-proof device that prevents your vehicle from starting without a correctly entered PIN code. It is hidden within your vehicle's wiring harness. It uses buttons on the steering wheel or dashboard to generate a unique code sequence. Unlike Thatcham devices, it doesn't use LED indications and is connected to your vehicle through the CAN system, which makes it undetectable by professional thieves who use readily available diagnostic tools that detect alarm/immobiliser circuits in modern vehicles.
Inputting an emergency override on the app on your phone will temporarily disable your Ghost immobiliser. This allows you to loan your car to a family member or valet without sharing your pin number and is perfect for situations like servicing, or when you have to leave your car at valet parking or garage.
Ghost can also be utilized with a driver fob which allows you the option of being able to start your vehicle using either your key or app. This is a great option if you want to give your child the keys to the car or if you're unable to enter the pin number quickly.
It's not a surprise that the Ghost immobiliser is a simple PIN-change procedure, user-friendly interface, and numerous security features, is recommended by a variety of insurance companies. It is also backed by a security guarantee. Its sleek slim design and seamless integration with the vehicle's existing systems make it a vital accessory to any high-performance or classic car.
Service/Valet Mode
The Ghost is an immobiliser that can prevent vehicle theft by blocking communication between your key and the ECU which means that the engine can't be started without entering a unique PIN code. It's also hidden within the wiring allowing it to remain unnoticed, and it doesn't use LED indicators which could indicate its presence. This is great when you want to give your car to a mechanic, or even valet parking. To activate valet mode, enter the code that was provided to you by your engineer upon the completion of installation - this will allow the car to start without the need to enter the disarm sequence. To leave valet, return your vehicle to normal operation. The code will change automatically back to your usual pin.
In contrast to other security devices that rely on your vehicle's buttons or key-fobs, Ghost is designed to be integrated into your cars CAN bus system. This gives it unmatched protection against the latest theft methods like key cloning or hacking.
Once installed your engineer will show you how to arm, disarm and valet mode your vehicle. All of this can be accomplished via your smartphone app. Your engineer will generate an individual pin that is easy to remember, yet mathematically impossible for thieves. If you forget it do not worry, as every installation comes with an Emergency PIN Code Override to make sure your vehicle is working.
Our installers are fully qualified and have been trained to ensure that your Ghost is installed correctly. All installations are performed on the premises of the customer. We also offer a walk-through on how to use the device and mobile application. After your Ghost has been installed, we ensure its functionality for life.